Trying to follow an online tutorial.

Can someone explain plaease how to create this to get started.

646ba4eb05574.jpg

Trying to follow an online tutorial. Can someone explain plaease how to create this to get started. ![646ba4eb05574.jpg](serve/attachment&path=646ba4eb05574.jpg)
 
0
reply

That is a Julia Set using z = z² + C where C is somewhere around -0.75 ± 0.2i, you can open UF with the default MB set and press F7 to go into switching mode, then hover around the connection between the main bulb and the largest bulb (just left of the center) outside the MB set (within the colored part, not the black one).

Smooth (Mandelbrot) is the default coloring selected when first opening the program with no other windows open, then just adjust the gradient.

That is a Julia Set using z = z² + C where C is somewhere around -0.75 ± 0.2i, you can open UF with the default MB set and press F7 to go into switching mode, then hover around the connection between the main bulb and the largest bulb (just left of the center) outside the MB set (within the colored part, not the black one). Smooth (Mandelbrot) is the default coloring selected when first opening the program with no other windows open, then just adjust the gradient.
edited May 23 '23 at 7:37 am
 
0
reply
55
views
2
replies
2
followers
live preview
Enter at least 10 characters.
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft