Spizzi
posted Jun 11 '22 at 6:46 pm
Hi All,
I share in forum this UPR of the last year, sincerely this is a ten minutes brot, it uses SlopeMixedQuatMandelbrot Formula in as2.ufm, colors 3DTexturizerEnhanced III, Basic 3, Coordinate Circle, As-Harlequin, zoom 4E9, 2021, 8 layers.
Coordinate Circle is very useful for highlighting the boundary of the fractal when using slope colors. Maybe is slow to load in my computer i7 32gb
Spizzi
posted Jun 11 '22 at 7:29 pm
Hi, this is another Mandelbrot of 2020, not deep zoom, Slope 3D Texturizer Enhanced III, Coordinate Circle, Lighting with Texture, 12 Layers 2560X1080 Pixel, ten minutes to load on my computer.
I like this, usually i print at 100cm X 50cm on glossy canvas, at moment i have 7 prints on my home or 100X50CM or 60X60cm, on glossy canvas colors are perfect and just pass the swiffer to remove the du
Spizzi
posted Jun 10 '22 at 8:30 pm
Hi everyone, I was lucky enough to know Ron even if only virtually and he taught me a lot about fractals and has influenced my style over the years. This UPR is to remind him, a small gesture that I hope is appreciated. Thanks Ron.
Andrea
PS: I suggest to do an upload of the UFDB i have update both as2.ufm that as.ucl
ForRon {
; Tweaks ok
::fpzkVgn2t35SPSutRA47Lw+foRf1Y2R8
I would like an option to turn off all the sounds.
Currently (on Windows) when I exit a fractal without saving it, or save over an existing upr or render over an existing image, a window pops up and Windows Background.wav plays. The popup without the sound is sufficient.
(Preference/Fractal does have options to turn off the sound when the fractal window finishes and when a render job fin
Spizzi
posted Jun 4 '22 at 6:57 pm
Hi All,
I'm trying to upload a new folder of fractal formula, as2.ufm, but how can i do it? Because on the author login the software allows only to replace as.txt or as.ufm etc....etc.. so i tried to upload as2.ufm keeping as.txt and i think that now i have upload a new .txt and not as2.ufm.
How can i do? Can someone one help me?
Thanks and good evening
Andrea
JVYV
posted Jun 1 '22 at 11:44 am
Hi All,
This month 3 very beautiful fractals in the collection.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey
When loading an old fractal after changing my formulas (without proper attention to old fractals), I got this error message:
In fact, the missing parameter is not in SwitchComboFormula in jlb.ufm. SwitchComboFormula calls SwitchCombo in jlb.ulb, which calls Mandelbrot in jlb.ulb, which has the missing parameter.
If the error message could be improved, that would save some debugging
Spizzi
posted May 17 '22 at 12:18 am
Hi All, I'm Andrea Spinozzi from Italy, thanks to Frederik to add me at the forum, i'm doing fractals from 2002 and the passion is never stopped I share with you some parameters creating with a formula that i will upload next weeks in the UFDB, the folder is named as2.ufm at for the moment you can download on my site and name as2.ufm in your directory of UF, the folder has 11 hyper complex formu
This fractal is for the April 2022 Challenge at https://www.deviantart.com/ultra-fractal-redux, which required using formula “Gnarlathotep 3 reversed version 2” in ejb.ufm. It surprised me that a Color Density of 0.0001 was needed, a new record for me. You'll need to update your formulas, as I added an Over/Under coloring and a Mask Coloring to jlb.ulb.
(I've boosted the contrast
JVYV
posted May 2 '22 at 9:22 am
Hi all,
This month 1 very beautiful fractal in the collection.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey
JVYV
posted Mar 31 '22 at 4:17 pm
Hi All,
This month 3 very beautiful fractals in the collection. As you can see in de upr file, there is a fourth fractal in the upr but I was unable to create it.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey
That seemed to work, as you see I am logged in now. Many moons have passed since my old fractal days. Back into it, and thoroughly enjoying fashioning fractals again. Also hello everyone new member to this, but old member to the mailing list.
I have actually named each layer now, hehehe! :Edit I seem to have a problem getting the full upr into this?
spiarlFloral {
::pMV1dhn2s39WTyxxVCe+3bz6vDph3RWx9L7a8hhiLpNj1qbYSa3229l2KRWUsoARhuKgWSzn
+1jbZec3PnTEJ6nAw/xsZGhqq/Z4ZGRGh75lf8nf++f8D3/2/P+n/nOd6DP+h3+w38qXe/j3
/8bP9zv9pnv/tv60f7xf6D/y3UWNUc6Xe4x/yv8hvpvb40bv/f8wzv8Nl1lTl/4zP8TP+hX+
mX9He6dv7xHO9/6+f7hXO9Hf4n/wTv7
I really need to start naming the layers so others might like to see new unknown techniques.
Choco {
::Sl/khgn2t3dXTuNu5eC87TV57QX+eLTCSQQubpLmJJeqz5k3q4Z3U7ezUasYbrMSqbLp2z05
T/CQQQ9AgH8I7EvTSO5fqzJRto+TBKACCwX+57Pt5tX2s//xv8Xc3dX2dZ/46X8re/Dv9hXc
3Pub7l3vuW1Xd37H39u3fZtpr/u9bee8051tVuAv9042dXOv+F/pHOec34d/nbOMe+u3Me/l
HO+/s5VqK7/nS9i72c8yuN73t58ujvb9zjn/l/ipVz0X6b384ldPcc9
I am basically lazy when it comes to building fractals with a lot of layers, I have grown use to not getting confused and knowing where I am. This is quite a large set and takes a time to load depending of course on your RAM. Have a tweak if you wish?
HopeForUkrain {
::9abf2in2t39WzNOS+da47nImvDK0V7eRRBgEH9G8iuGHqWvbP2TM1Y7YvaC0SUqobSpSkS90
l/0vZm4A/nIPwqHHuO+OhPoig/ATw8AyEE4Zu7Q/NP
The previous "Sixteen Ways" kept the formula fixed and changed the coloring on the Outside tab. This version is the opposite, using the new "tweaking" capabilities in the newly uploaded jlb.ulb.
The coloring uses the Arithmetic Average of the distance of z from the origin, starting with iteration 8 and continuing for 100 iterations, or until bail out. All 16 mini-fractals use the same colorin
JVYV
posted Mar 1 '22 at 9:56 am
Hi All,
This month two very beautiful fractals in the collection.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey
I'm confused. What should go in place of * in the code below? Or is this not the way to do this?
class cTweak {
public:
import "common.ulb"
func cTweak()
cTransform = new @cUT(***)
endfunc
complex func go(complex v)
return cTransform.Iterate(v)
endfunc
protected:
UserTransform cTransform
default:
UserTransform param cUT
caption = "c-tweak transform"
defa
Phillip
posted Feb 4 '22 at 10:46 am
Hello,
since some people were wondering how I made some of my images, I decided to write a short tutorial on how to use the coupling loops formula in phs.ufm which I used several times over the last months.
When you first open it, this is what it looks like. The loopy stuff is located in the valleys of the main set and also the minibrots. As a rule of thumb, the higher c is, the stronger
Phillip
posted Jun 28 '21 at 2:19 pm
Hello,
I upgraded to UF 6.04 today and every time I open the explorer window for any parameter I get a huge CPU spike. This happens even if my mouse is nowhere near the window and nothing else is rendering. This takes several seconds and despite having a 12C/24T CPU it drains my computer of resources to an extent that even the playback of windowed Youtube Videos starts to stutter.
Oddly e
Phillip
posted Jan 27 '22 at 3:27 pm
Hello!
I'm currently rendering a fractal that told me it would take 8 hours initially, quickly rose to 9 hours, then 10 hours. Now it has been running for almost 3 hours and it still predicts between 9 and 10 hours.
Here's my guess of what is happening: The fractal is basically a spiral with the highest iteration counts toward the center of the image, so I would expect the rendering to sl
JVYV
posted Feb 1 '22 at 2:13 pm
Hi All,
This month only one but a very beautiful "16 in one" fractal in the collection.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey
Phillip
posted Jan 19 '22 at 1:54 pm
Hello,
I recently ran into the problem of wanting to use the switch to Julia mode on a pretty multi-layer fractal. It would be great to have a way of using all layers for the new Julia fractal, rather than just the active layer. I get that it's possible to do them one by one and copy-paste them into the same window, it just seems a lot more tedious that it has to be.
Best regards,
Phi
jabeck
posted Dec 26 '21 at 7:13 pm
Hi, I've been playing around with the image Trap coloring as mentioned in the manual, but got curious, is there something similar that can take a movie file instead of a still image? Or can it be coded? Thanks!
(Literary readers: yes, this is a reference to the Wallace Stevens poem, “Thirteen Ways of Looking at a Blackbird.”)
This image has 16 fractals arranged in a 4 by 4 array. All 16 have the same gradient and the same Formula tab (Julia from Standard.ufm). All of the Outside tabs use Plug-in Coloring (Gradient) from Standard.ucl, and the Distance Coloring plug-in from jlb.ulb. The di
jam
posted Dec 14 '21 at 1:06 pm
Just FYI, I have not been able to connect to the formula database site in several days. Anyone else having this problem?
JVYV
posted Jan 2 '22 at 9:12 am
Hi All,
This month no new fractal parameter files in the collection.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey
Now that Windows 11 has started rolling out to end users I would be interested to know if Ultra Fractal has been tested on this platform.
I'm assuming UF will probably run ok on Win11?
Thanks.
Censorship is a terrible thing.
JVYV
posted Nov 30 '21 at 1:06 pm
Hi All,
This month no new fractal parameter files in the collection.
You can find the whole existing collection at the cloud of Microsoft:
https://onedrive.live.com/redir?resid=2AB35EAF574CA6CE!1034&authkey=!ALIZio6ZmgV1aAo&ithint=folder%2ctxt
Greetings from Belgium
Jan Vyvey